Picking up from Part 2, the third and final part of the wood click gears with motor drive build covers the stepper motor drive. The gears ended up driving this really beautiful clock. Note that I did not build the clock, just the gears driving the hands.
Reading Time: 2 minutesPicking up from Part 1 of the wood clock gears project where I designed the gears, Part 2 will cover the physical assembly of the gear build. This was the simplest part of the build since it only involved cutting the gears using a laser cutter and gluing everything together.
Continue reading Wood Clock Gears with Motor Drive – Part 2 of 3
Reading Time: 3 minutes
I was asked to design and build the gear and drive mechanism for a 6 foot clock. The clock had an hour and a minute hand and needed to move in both the clockwise and anti-clockwise direction. This was not a “realtime clock” and needed to move visibly fast.
I decided to use wood clock gears with a motor drive for the sake of simplicity. This build was definitely more out of my comfort zone than usual but proved to be a fun and educational experience. Part 1 goes over the design of the gears. Part 2 will cover the physical build and Part 3 the electrical design and final build.
Continue reading Wood Clock Gears with Motor Drive – Part 1 of 3
